How to set or change your Inmotion RS 3.0 password

How to Set or Change Your Inmotion RS 3.0 Password: PIN, Alarm and App

How to lock the Inmotion RS 3.0 from the touchscreen, what the alarm does, how to pair the new Inmotion app, and how to change the default 0000 PIN, with our video.

The Inmotion RS 3.0 has a lock built in. You can lock it from the touchscreen or from your phone, and if anyone moves it while it is locked, the alarm goes off. Every RS 3.0 leaves the factory with the same PIN, so the first thing to do is make it yours. Our short video covers the whole thing, and this guide walks through it step by step.

Prefer YouTube? Watch it on our channel.

Step 1: Lock it from the screen

The lock icon on the Inmotion RS 3.0 touchscreen
The lock icon sits right on the touchscreen dashboard.
  1. Tap the lock icon on the touchscreen dashboard.
  2. Once it is locked, try to push it. The wheel locks, the lights flash and the horn sounds.
The RS 3.0 alarm going off when the locked scooter is pushed
That is the alarm doing its job. Unlock before you move it.

Step 2: Unlock with your PIN

The RS 3.0 touchscreen asking for the four digit PIN
Out of the box, the PIN is 0000.
  1. Wake the screen and enter your four digit PIN.
  2. Out of the box, the PIN is 0000. You will change it in step 4.

Step 3: Pair the new Inmotion app

The new Inmotion app paired with an RS 3.0
Once paired, you can lock and unlock from your phone.
  1. Open the app and search for your vehicle.
  2. When it shows up, connect it. A beep from the scooter means it is paired.
  3. Now you can lock and unlock from your phone too. Locking turns the screen off, and unlocking brings it back.

Use the new app. The RS 3.0 works with the new Inmotion app only. The old Inmotion app will not connect to it.

Step 4: Change your PIN

Vehicle Settings in the Inmotion app, changing the vehicle password
Settings, then Vehicle Password, then Confirm.
  1. In the app, open Settings, then Vehicle Password. Your current PIN shows there.
  2. Enter a new four digit PIN and press Confirm.
  3. Lock the scooter and unlock it with the new PIN, to check it took.

Pick a PIN only you know. Skip 0000 and easy ones like 1234, and keep it somewhere safe.

Inmotion RS 3.0: price and availability

How to set or change your Inmotion RS 3.0 password
The Inmotion RS 3.0, with the lock built into the touchscreen.

The RS Yellow 3.0 is in stock at $3,199, with the color touchscreen and built in lock, thumb throttle, steering damper and four piston calipers. See the RS 3.0

Just got yours? Start with our RS 3.0 unboxing and setup walkthrough, which covers every screw in the box.

Frequently asked questions

What is the default PIN on the Inmotion RS 3.0?

Out of the box, the RS 3.0 vehicle PIN is 0000. Change it to your own four digit PIN in the Inmotion app.

How do I change the RS 3.0 password?

Pair the RS 3.0 with the new Inmotion app, open Settings, then Vehicle Password, enter a new four digit PIN and press Confirm. Then lock the scooter and unlock it with the new PIN to check it took.

How do I lock the RS 3.0?

Tap the lock icon on the touchscreen dashboard, or lock it from the Inmotion app once your phone is paired. Locking from the app turns the screen off.

What happens if someone moves a locked RS 3.0?

The wheel locks, the lights flash and the horn sounds.

Does the old Inmotion app work with the RS 3.0?

No. The RS 3.0 works with the new Inmotion app only. The old Inmotion app will not connect to it.

How do I know the app is paired?

Search for your vehicle in the app and connect it. A beep from the scooter means it is paired.

Trouble pairing? Contact us and tell us what the app shows.

Previous Article
Next Article

0 comments