Free shipping on most items 0% APR financing available 1-Year Warranty 24/7 Live Chat 8+ Years in Business
619 products
Swingarm Bearing For Daytona
$10.95 USD
Replacement swingarm bearing for the Hooga Daytona.Fits: Hooga DaytonaGenuine replacement part from VoroMotors, the official US distribution partner, with real US parts support after the sale.
T-Bar for Cruiser
$7.00 USD
Premium welded replacement T-Bar for the EMOVE Cruiser only.Fits: EMOVE CruiserDo not order this for an EMOVE Touring, which uses a drilled hole for the locking pin instead.Genuine replacement part from VoroMotors, the official US distribution partner, with real US parts support after the sale.
Taillight LED Strip for Cruiser V2
$19.95 USD
Replacement rear taillight LED strip with signal light for the EMOVE Cruiser V2.Fits: EMOVE Cruiser V2Genuine replacement part from VoroMotors, the official US distribution partner, with real US parts support after the sale.
Taillight Rubber Seal for Cruiser V2
$11.95 USD
Replacement taillight rubber seal for the EMOVE Cruiser V2.Fits: EMOVE Cruiser V2Genuine replacement part from VoroMotors, the official US distribution partner, with real US parts support after the sale.
Tailpiece Mount for E Ride Pro SS
$13.95 USD $16.95 USD
Replacement tailpiece mount for the E Ride Pro SS.Fits: E Ride Pro SSGenuine replacement part from VoroMotors, the official US distribution partner, with real US parts support after the sale.
Currently out of stock
Swingarm for E Ride Pro SS
$349.95 USD
Replacement swingarm for the E Ride Pro SS.Fits: E Ride Pro SSGenuine replacement part from VoroMotors, the official US distribution partner, with real US parts support after the sale.
Swingarms for Daytona
$119.95 USD
Taillight Assembly for Inmotion RS
$59.95 USD
Replacement taillight assembly for the Inmotion RS.Fits: Inmotion RSGenuine replacement part from VoroMotors, the official US distribution partner, with real US parts support after the sale.
Taillight Assembly for RoadRunner Pro V2
$49.95 USD
With License Plate Holder
Taillight for E Ride Pro SS
$24.95 USD
Fits the E Ride Pro SS. Replacement rear light. Being seen from behind is the one piece of safety equipment you cannot check while riding, so a dead taillight is worth fixing the same week it fails.Replace yours if It has stopped lighting, or flickers over bumps The lens is cracked or has taken on water The housing was damaged in a fall Plugs into the existing loom. If you would rather not fit it yourself, our service team can quote the job.
Taillight for Fighter Supreme 7260R
$19.95 USD
Replacement taillight for the Teverun Fighter Supreme 7260R.Fits: Teverun Fighter Supreme 7260RGenuine replacement part from VoroMotors, the official US distribution partner, with real US parts support after the sale.
Taillight LED Strip for Roadster
$19.95 USD
Replacement rear taillight LED strip for the EMOVE Roadster.Fits: EMOVE RoadsterGenuine replacement part from VoroMotors, the official US distribution partner, with real US parts support after the sale.
Tailstock for E Ride Pro SS
$169.95 USD
Replacement tailstock for the E Ride Pro SS.Fits: E Ride Pro SSGenuine replacement part from VoroMotors, the official US distribution partner, with real US parts support after the sale.
Tapered Roller Bearing for E Ride Pro SS
$24.95 USD
Replacement tapered roller bearing for the E Ride Pro SS.Fits: E Ride Pro SSGenuine replacement part from VoroMotors, the official US distribution partner, with real US parts support after the sale.
Teverun 67.2V 6A Fast Charger for Blade GT II and Blade M...
$120.95 USD
The charger in the box with your Teverun pushes 2 amps, so a flat pack takes about 15 hours. This one pushes 6 amps. Same voltage, same connector, three times the current. Put the scooter on charge when you get home and it is ready the same evening, instead of the next morning. Same outlet. Same connector. A third of the wait. Approximate, from empty to full. A pack always slows down near the top. Blade GT II, 60V 30Ah Stock charger, 2A about 15 hours This charger, 6A about 5 hours Blade Mini Ultra, 60V 27Ah Stock charger, 2A about 13.5 hours This charger, 6A about 4.5 hours Those times are approximate. A battery slows down as it nears full, so the last few percent always take longer than the arithmetic suggests, and temperature and pack age move it too. What it fits Teverun Blade GT II, 60V 30Ah Teverun Blade Mini Ultra, 60V 27Ah What it does not fit This is a 60V charger, so it is not the right charger for a 72V or 52V Teverun. It does not fit the Fighter Supreme 7260R, the Fighter Supreme Ultra, or the Space Lite. If your scooter is not one of the two listed above, message us before you order and we will tell you which charger you need. Specifications Output: 67.2V DC, 6.0A, 403.2W Input: 100 to 240V AC, 50/60Hz, 8.0A max Connector: 3 pin GX16, the same plug as your stock charger Model: XVE420-06720600 Certification: CE, FCC, RoHS, Energy Efficiency Level VI Housing: finned aluminium, IP20, indoor use only Reading the light Blue: plugged in and working Red: charging Green: full, or not connected to the scooter Charging safely Charge indoors on a hard surface, not on carpet or a bed, and not shut inside a cupboard. This unit moves 403 watts and the aluminium case is finned because it is meant to get warm. Give it air. Try not to leave a charge running unattended overnight, which is a good deal easier now that it finishes in an evening.

See why riders buy from VoroMotors

Hear from others

Real riders. Real reviews.