How to Unlock Top Speed on Teverun & Blade Scooters (And How to Avoid "Bricking" Your Settings)

How to Unlock Top Speed on Teverun & Blade Scooters (And How to Avoid "Bricking" Your Settings)

VORO Editorial Team on

Want to remove the speed limit on your 7260R, Teverun Fighter Mini Pro or Blade GT II? Follow our step-by-step remote unlock guide. Plus, why you should NEVER manually adjust P-settings on the TFT display.

If you just unboxed your new Teverun Fighter Mini Pro, Blade GT II, or Blade Mini Ultra, you likely noticed the green "Ready" icon on the dashboard. This indicates the scooter is in Speed-Limited Mode (usually capped at 25 km/h or 15 mph) to comply with international shipping regulations.

For riders operating on private land or in regions where high-speed riding is permitted, unlocking the full potential of your machine takes less than 5 seconds—if you know the proper technique.

However, as the official warehousing partner for Teverun, we have seen hundreds of owners accidentally mess up their scooter's configuration by doing this wrong.

Here is the definitive 2026 guide to unlocking your scooter safely.

The "Remote Unlock" Method (Step-by-Step)

Prerequisite: Ensure your scooter is powered on and you have the oval-shaped remote key fob in hand.

Step 1: Check Your Status

Look at the TFT display.

  • Green "Ready" Icon Visible: You are Speed Limited.

  • No Icon: You are Unlocked.

Step 2: The "Hover" Technique (Crucial Step)

Voro Service Pro Tip: Many riders think their NFC Key is broken because the scooter won't react. This is almost always a positioning error.

  • Do NOT hold the NFC key in the middle or bottom of the screen.

  • DO hover the NFC key directly over the TOP edge of the display. This is where the signal receiver is located.

  • The NFC key is not the REMOTE FOB.

Step 3: The Button Combination

While hovering the remote at the top of the screen:

  1. Press and HOLD the Unlock button (Open Padlock icon).

  2. While holding Unlock, immediately press and HOLD the Lock button (Closed Padlock icon).

  3. Keep both held down for approximately 1 second.

Step 4: Success

The green "Ready" icon will disappear. Your speed limiter is now removed, and you have access to the full voltage of the scooter.

⚠️ CRITICAL WARNING: Do Not Touch the P-Settings Manually

This is the #1 service issue we see at our Los Angeles repair center.

On older scooters, you would adjust acceleration or voltage settings by clicking buttons on the display. Do not do this on the 2026 Teverun/Blade TFT displays.

Why? The 2026 controllers are complex. Manually forcing P-setting changes via the physical buttons often conflicts with the controller's logic, leading to error codes, "bricked" settings, or erratic throttle response.

The Solution: Use the Teverun App The only safe way to customize your ride (LED patterns, acceleration curves, braking strength) is via the Teverun App. The app automatically validates your settings to ensure they are safe for your specific battery and motor configuration.

Why Smart Riders Buy Teverun at VoroMotors

You might see Teverun or Blade scooters listed on random websites, but there is a reason the enthusiast community buys from VoroMotors.

1. We Are the Warehouse VoroMotors serves as the direct warehousing partner for the Teverun manufacturer.

  • What this means for you: When you buy from us, you aren't getting "old stock" that has been sitting in a container for 8 months. You are getting the latest production batch with the newest firmware, updated screens, and fresh battery cells. We are the first to receive the new tech, every time.

2. 7-Day American Support Most retailers have a generic email address that takes 4 days to reply.

  • The Voro Difference: Our support team is based here in the USA and works 7 days a week. These are real American employees who ride these scooters daily. If you have an issue on a Sunday, we are here.

3. Parts Availability Because we house the inventory, we also house the parts. From replacement TFT screens to specific controller units, we stock the components to keep your Teverun on the road for years, not just months.

Ready to ride the latest tech? Don't gamble on grey-market imports. Get the freshest inventory directly from the source. [Shop the Official Teverun & Blade Collection Here]

How to Re-Lock Your Speed

Need to restrict the scooter again for a younger rider or public area?

  1. Hover the remote at the TOP of the screen.

  2. Press the Middle Button (Lightning Bolt icon) once.

  3. The green "Ready" icon will reappear, capping speed at 25 km/h.

Why VoroMotors? Putting Real-World Data into Action

The insights in this article come directly from our deep experience and performance testing. We believe riders deserve transparent, data-driven advice before investing in a personal electric vehicle.

What We Do:

  • Curate and sell high-performance electric scooters and e-dirt bikes.

  • Provide expert, in-house technical support and maintenance.

  • Conduct rigorous, real-world testing to provide you with honest performance specs.

What We Are Not:

  • A drop-shipper of low-quality, unreliable scooters.

  • A marketplace for used or unverified vehicles.

  • The cheapest online retailer with no after-sales support.

Ready to find your perfect ride with a team that values performance and transparency? Explore our collection at www.voromotors.com today.

Previous Article

0 comments