December 11, 2017 1 min read
Following criteria for all bicycles and PMDs which are used on public paths:
Maximum width of 700mm;
Maximum unladen weight of 20 kg;
Maximum device speed of 25km/h (for motorised devices only).
For EMOVE scooters, you are able to adjust your speed to comply with LTA regulations, for lots of users, they want the battery capacity but they do not want the high speed. If you are one of these users, you are IN for a treat!
1. Press both (Power and Mode) button
2. Press mode button and get to P8
3. Press power button to enter the setting
4. Press power button again to reduce the speed (Numbers shown on display are in percentage %)
Set your speed according to how fast you would like to go.
E.g. If you set it to 25%, your scooter can achieve around 25km/hr
Speed Mode 3 (Max Speed around 25km/hr)
Speed Mode 1( Max Speed around 6-7km/hr)
No matter what speed you are on, if you capped the max speed setting to 25%, the highest you can go is 25km/hour.
You're welcome!
September 10, 2019
How fast can these scooters actually go? 30ish?
September 02, 2019
It would be nice to be able to utilize everything the onboard computer is capable of. I know certain things are locked for the users protection, but if I have a complete set of instructions on what does what, I can easily figure it out. I want to know if there is a way to unlock everything.
August 04, 2019
Do you have a manual guide book on the LCD control dashboard? I’d like to know what all the warning icons mean. Thanks for your help!
August 02, 2019
Hi, my scooter controller battery display keep on blinking and never show how much battery percentage left. Does that mean that something wrong with my setting or battery problem?
August 02, 2019
My scooter doesn’t give a damn..even with the setting on 25km it just goes way past that when riding 😅😆
June 09, 2019
This is awesome i followed the guide and now my e-scooter is capped at 25km/h! I dont need to worry about LTA enforcement spot check anymore! YAYYY
June 06, 2019
Hi my throttle does not have p8 setting in the menu or is hidden please help
Comments will be approved before showing up.
May 11, 2024 7 min read
April 28, 2024 12 min read
April 26, 2024 3 min read
Scooter
March 09, 2020
Here are the other settings P0-P9
https://www.voromotors.com/blogs/news/ever-wonder-what-does-p0-p9-stands-for