Black 3D-printed scooter cup holder with rubber strap and front handle slot
Tumbler seated in the holder, handle down the front slot, strap over the lid
Looking down into the holder to show how deep the cup goes
Close-up of the printed rim, wall thickness and rubber strap pin
Water bottle held in the cup holder
Can held in the cup holder
Tall can held in the cup holder
Cup holders mounted on a scooter handlebar and stem
Black 3D-printed cup holder lit from the right
Holder with a tumbler mounted low on the scooter stem near the fork
Holder with a water bottle clamped on the handlebar beside the grip

MB DESIGNS Γ— VM

Scooter & E-Bike Cup Holder for 1L+ Bottles & Tumblers (Handlebar or Fork Mount)

Your drink, within reach. Pick a handlebar mount or a 40mm fork clamp. 3D-printed by MB Designs.
$99.00 USD
Mount: Handlebar

MB DESIGNS Γ— VM

The ultimate cup holder.

Black 3D-printed cup holder with a rubber strap, lit from the side

Up close

Every layer, in the light.

3D-printed by MB Designs, with a rubber strap across the top to keep your drink seated while you ride.

Tumbler seated in the holder with its handle in the front slot

Drop it in

The handle rides the slot.

A big tumbler goes straight down, the handle slides into the front slot, and the strap closes over the lid so it stays put.

Water bottle, can and tall can each held in the cup holder

Not just tumblers

Bottle, can, tall can.

Bottles, cans and tall cans sit in the same cup.

Water bottle clamped in the holder beside the handlebar grip

Handlebar mount

Clamps right to the bar.

Fits the Hooga Daytona, Teverun Fighter Supreme, Teverun 7260R, Surron and e-bikes.

Tumbler seated in the fork-mount holder on a scooter stem, rubber strap over the lid

Fork mount

Made for the VMΒ 1, Delta and Daytona.

The adjustable 40mm fork clamp is built for the Aptum VM 1, the Altis Delta and the Hooga Daytona.

Bottle or cup. Your call.

Bottle

Keeps a bottle upright beside you.

Bottle
Cup

Coffee on the way in, water on the way home.

Will it fit my ride?

Pick the mount that matches your ride.

Hooga Daytona Handlebar or fork mount
Teverun Fighter Supreme Handlebar mount
Teverun 7260R Handlebar mount
Surron Handlebar mount
E-bikes Handlebar mount
Aptum VM 1 Fork mount
Altis Delta Fork mount

Not sure? Contact us before ordering and we'll check your scooter and your bottle.

In the box.

Holder 1 Γ—
Slotted strap 1 Γ—
Thin side-bracket clamp 1 Γ—

Every angle.

STUDIO Β· DETAIL Β· ON THE ROAD
Scooter & E-Bike Cup Holder for 1L+ Bottles & Tumblers (Handlebar or Fork Mount)
Scooter & E-Bike Cup Holder for 1L+ Bottles & Tumblers (Handlebar or Fork Mount)
Scooter & E-Bike Cup Holder for 1L+ Bottles & Tumblers (Handlebar or Fork Mount)
Scooter & E-Bike Cup Holder for 1L+ Bottles & Tumblers (Handlebar or Fork Mount)
Scooter & E-Bike Cup Holder for 1L+ Bottles & Tumblers (Handlebar or Fork Mount)
Scooter & E-Bike Cup Holder for 1L+ Bottles & Tumblers (Handlebar or Fork Mount)

Questions.

Handlebar mount: Hooga Daytona, Teverun Fighter Supreme, Teverun 7260R, Surron and e-bikes. Fork mount: Aptum VM 1, Altis Delta and Hooga Daytona only. If your ride isn't listed, contact us and we'll check.

Two ways. The handlebar mount clamps to your bar. The fork mount uses an adjustable 40mm fork clamp. Both come with the slotted strap and the thin side-bracket clamp.

The holder, a slotted strap and a thin side-bracket clamp.

Each holder is 3D-printed by MB Designs and carries a white VM logo.

Exact specs are still being finalized. Send us your bottle or cup size before ordering and we'll confirm.

Ride with your drink.