How to change my electric scooter tyre? This guide will be a proper step by step guide to provide additional help in changing your escooter tyre. The whole process takes between 5-10 mins for experienced guys, 15-20mins for beginners. Promise you, this is not rocket science. It's really easy. This method is recommended by technicians from the factory and only works for the latest series of motor hubs, which are called split motor. 

Here is how a split motor looks like

Before we move into more details, it's important to understand how the tyres look like from the inside.

Step 1 - Remove The Nuts

Step 2 - Unscrew Disc Brake

Step 3 - Remove Motor Screws 

Optional Step - Knock The Motor

This is to loosen the motor if it's too tight. Don't worry, EMOVE Cruisers motor are built to last. They are tough. But don't knock too hard.

Step 4 - Open Up The Split Motor

Step 5 - Change New Inner Tube

We have seen many cases where users do not need to change the inner tube, you can just patch it up with a sealant, that will work as well.

Step 6 - Pump Air 

Pump just enough for you to put it back to the motor, just a little will do, remember, you can always pump more later. 

Step 7 - Install Tyre To Motor

This is the EASIEST. Just reverse the whole process to put your tyre back to the motor.